Monitoring aboveground biomass (AGB) and its density (AGBD) at high resolution is essential for carbon accounting and ecosystem management. While NASA's spaceborne Global Ecosystem Dynamics Investigation (GEDI) LiDAR mission provides globally distributed reference measurements for AGBD estimation, the majority of commercial remote sensing products based on GEDI remain without rigorous or independent validation. Here, we present an independent regional validation of an AGBD dataset offered by terraPulse, Inc., based on independent reference data from the US Forest Service Forest Inventory and Analysis (FIA) program. Aggregated to 64,000-hectare hexagons and US counties across the US states of Utah, Nevada, and Washington, we found very strong agreement between terraPulse and FIA estimates. At the hexagon scale, we report R2 = 0.88, RMSE = 26.68 Mg/ha, and a correlation coefficient (r) of 0.94. At the county scale, agreement improves to R2 = 0.90, RMSE =32.62 Mg/ha, slope = 1.07, and r = 0.95. Spatial and statistical analyses indicated that terraPulse AGBD values tended to exceed FIA estimates in non-forest areas, likely due to FIA's limited sampling of non-forest vegetation. The terraPulse AGBD estimates also exhibited lower values in high-biomass forests, likely due to saturation effects in its optical remote-sensing covariates. This study advances operational carbon monitoring by delivering a scalable framework for comprehensive AGBD validation using independent FIA data, as well as a benchmark validation of a new commercial dataset for global biomass monitoring.

The United States national forest inventory (NFI) serves as the foundation for forest aboveground biomass (AGB) and carbon accounting across the nation. These data enable design-based estimates of forest carbon stocks and stock-changes at state and regional levels, but also serve as inputs to model-based approaches for characterizing forest carbon stocks and stock-changes at finer resolutions. Although NFI tree and plot-level data are often treated as truth in these models, they are in fact estimates based on regional species-group models known collectively as the Component Ratio Method (CRM). In late 2023 the Forest Inventory and Analysis (FIA) program introduced a new National Scale Volume and Biomass Estimators (NSVB) system to replace CRM nationwide and offer more precise and accurate representations of forest AGB and carbon. Given the prevalence of model-based AGB studies relying on FIA, there is concern about the transferability of methods from CRM to NSVB models, as well as the comparability of existing CRM AGB products (e.g. maps) to new and forthcoming NSVB AGB products. To begin addressing these concerns we compared previously published CRM AGB maps to new maps produced using identical methods with NSVB AGB reference data. Our results suggest that models relying on passive satellite imagery (e.g. Landsat) provide acceptable estimates of point-in-time NSVB AGB and carbon stocks, but fail to accurately quantify growth in mature closed-canopy forests. We highlight that existing estimates, models, and maps based on FIA reference data are no longer compatible with NSVB, and recommend new methods as well as updated models and maps for accommodating this step-change. Our collective ability to adopt NSVB in our modeling and mapping workflows will help us provide the most accurate spatial forest carbon data possible in order to better inform local management and decision making.

We present a solution for autonomous forest inventory with a legged robotic platform. Compared to their wheeled and aerial counterparts, legged platforms offer an attractive balance of endurance and low soil impact for forest applications. In this paper, we present the complete system architecture of our forest inventory solution which includes state estimation, navigation, mission planning, and real-time tree segmentation and trait estimation. We present preliminary results for three campaigns in forests in Finland and the UK and summarize the main outcomes, lessons, and challenges. Our UK experiment at the Forest of Dean with the ANYmal D legged platform, achieved an autonomous survey of a 0.96 hectare plot in 20 min, identifying over 100 trees with typical DBH accuracy of 2 cm.

Terrestrial laser scanning (TLS) is the standard technique used to create accurate point clouds for digital forest inventories. However, the measurement process is demanding, requiring up to two days per hectare for data collection, significant data storage, as well as resource-heavy post-processing of 3D data. In this work, we present a real-time mapping and analysis system that enables online generation of forest inventories using mobile laser scanners that can be mounted e.g. on mobile robots. Given incrementally created and locally accurate submaps-data payloads-our approach extracts tree candidates using a custom, Voronoi-inspired clustering algorithm. Tree candidates are reconstructed using an adapted Hough algorithm, which enables robust modeling of the tree stem. Further, we explicitly incorporate the incremental nature of the data collection by consistently updating the database using a pose graph LiDAR SLAM system. This enables us to refine our estimates of the tree traits if an area is revisited later during a mission. We demonstrate competitive accuracy to TLS or manual measurements using laser scanners that we mounted on backpacks or mobile robots operating in conifer, broad-leaf and mixed forests. Our results achieve RMSE of 1.93 cm, a bias of 0.65 cm and a standard deviation of 1.81 cm (averaged across these sequences)-with no post-processing required after the mission is complete.

However, conducting real-time forest inventory in large-scale and GNSS-interrupted forest environments has long been a formidable challenge. In this paper, we present a novel solution that leverages robotics and sensor-fusion technologies to overcome these challenges and enable real-time forest inventory with higher accuracy and efficiency. The proposed solution consists of a new SLAM algorithm to create an accurate 3D map of large-scale forest stands with detailed estimation about the number of trees and the corresponding DBH, solely with the consecutive scans of a 3D lidar and an imu. This method utilized a hierarchical unsupervised clustering algorithm to detect the trees and measure the DBH from the lidar point cloud. The algorithm can run simultaneously as the data is being recorded or afterwards on the recorded dataset. Furthermore, due to the proposed fast feature extraction and transform estimation modules, the recorded data can be fed to the SLAM with higher frequency than common SLAM algorithms. The performance of the proposed solution was tested through filed data collection with hand-held sensor platform as well as a mobile forestry robot. The accuracy of the results was also compared to the state-of-the-art SLAM solutions.

Understanding historical forest dynamics, specifically changes in forest biomass and carbon stocks, has become critical for assessing current forest climate benefits and projecting future benefits under various policy, regulatory, and stewardship scenarios. Carbon accounting frameworks based exclusively on national forest inventories are limited to broad-scale estimates, but model-based approaches that combine these inventories with remotely sensed data can yield contiguous fine-resolution maps of forest biomass and carbon stocks across landscapes over time. Here we describe a fundamental step in building a map-based stock-change framework: mapping historical forest biomass at fine temporal and spatial resolution (annual, 30m) across all of New York State (USA) from 1990 to 2019, using freely available data and open-source tools. Using Landsat imagery, US Forest Service Forest Inventory and Analysis (FIA) data, and off-the-shelf LiDAR collections we developed three modeling approaches for mapping historical forest aboveground biomass (AGB): training on FIA plot-level AGB estimates (direct), training on LiDAR-derived AGB maps (indirect), and an ensemble averaging predictions from the direct and indirect models. Model prediction surfaces (maps) were tested against FIA estimates at multiple scales. All three approaches produced viable outputs, yet tradeoffs were evident in terms of model complexity, map accuracy, saturation, and fine-scale pattern representation. The resulting map products can help identify where, when, and how forest carbon stocks are changing as a result of both anthropogenic and natural drivers alike. These products can thus serve as inputs to a wide range of applications including stock-change assessments, monitoring reporting and verification frameworks, and prioritizing parcels for protection or enrollment in improved management programs.

Rolf Schmitz is the Co-Founder & Co-CEO of CollectiveCrunch, a platform changing the world's understanding of forests by providing the most accurate, scalable, timely analytics globally and enabling sustainable forestry and bring transparency to carbon trading markets. Rolf is an Engineer by education and holds an MBA from Manchester Business School. He has deep experience in global Business Development and Sales, having built teams in Asia, USA and Europe. Could you share the genesis story behind CollectiveCrunch? We are steeped in handling large amounts of data and deriving insights from them.

Estimating forest AGB at large scales and fine spatial resolutions has become increasingly important for greenhouse gas accounting, monitoring, and verification efforts to mitigate climate change. Airborne LiDAR is highly valuable for modeling attributes of forest structure including AGB, yet most LiDAR collections take place at local or regional scales covering irregular, non-contiguous footprints, resulting in a patchwork of different landscape segments at various points in time. Here, as part of a statewide forest carbon assessment for New York State (USA), we addressed common obstacles in leveraging a LiDAR patchwork for AGB mapping at landscape scales, including selection of training data, the investigation of regional or coverage specific patterns in prediction error, and map agreement with field inventory across multiple scales. Three machine learning algorithms and an ensemble model were trained with FIA field measurements, airborne LiDAR, and topographic, climatic and cadastral geodata. Using a strict set of plot selection criteria, 801 FIA plots were selected with co-located point clouds drawn from a patchwork of 17 leaf-off LiDAR coverages (2014-2019). Our ensemble model was used to produce 30 m AGB prediction surfaces within a predictor-defined area of applicability (98% of LiDAR coverage), and the resulting AGB maps were compared with FIA plot-level and areal estimates at multiple scales of aggregation. Our model was overall accurate (% RMSE 22-45%; MAE 11.6-29.4 Mg ha$^{-1}$; ME 2.4-6.3 Mg ha$^{-1}$), explained 73-80% of field-observed variation, and yielded estimates that were consistent with FIA's design-based estimates (89% of estimates within FIA's 95% CI). We share practical solutions to challenges faced in using spatiotemporal patchworks of LiDAR to meet growing needs for AGB mapping in support of applications in forest carbon accounting and ecosystem.

"The machines are counting and measuring each tree – it is not an … A machine–learning algorithm developed by the team to analyze the data is as …

Forests are the major terrestrial ecosystem responsible for carbon sequestration and storage. The Amazon rainforest is the world's largest tropical rainforest encompassing up to 2,124,000 square miles, covering a large area in South America including nine countries. The majority of that area (69%) lies in Brazil. Thus, Amazonia holds about 20% of the total carbon contained in the world's terrestrial vegetation.1,5,7 But the rampant deforestation due to illegal logging, mining, cattle ranching, and soy plantation are examples of threats to the vast region.